Dry Powder Inhaler (DPI) for Asthma/DPI inhaler for capsule/Capsule Inhaler

1. Remove the protective cap of the inhaler2. Hold the inhaler with the button down, firmly hold the bottom of the inhaler, and turn the suction nozzle in the direction of the arrow to open the inhaler3. Remove one capsule from the foil package. The packaged capsules should be dry, hygienic and contain gelatin. Please remove the capsule from the aluminum plastic package only before use4. Put the capsule into the dosing bin5. Check whether the capsule has completely entered the dosing bin. If not, please put it correctly.6. Turn the nozzle back to the closed position to close the inhaler7. Hold the inhaler vertically (suction nozzle upward). Hold the push button with your index finger and thumb. Press the push button with both fingers at the same time. The force should be fast and stable. The capsule will be punctured evenly.8.Do not pass through the ventilator. Hold the inhaler horizontally.9. Tilt back slightly. Put the suction nozzle fully into the mouth, on the tongue behind the teeth. Close your lips tightly along the suction mouth. Inhale as deep as you can, fast and steady. If used correctly, the inhaler will make a click sound. This is because when the powder disperses, the capsule rotates at high speed in the rotating chamber.10. Take the inhaler out of your mouth and hold your breath for 5 to 10 seconds to allow the lung to absorb the drug fully. Exhale slowly. Open the inhaler and check whether the drug in the capsule has been completely sucked out. If there is still drug residue in the capsule, please repeat from step 8.11. After taking medicine, gargle with water and do not swallow.12. After each use, open the inhaler and discard the empty capsule shell. Replace the protective cap into the inhaler